While experts claim that the frequency of thunderstorms (lightning) is currently on the increase globally, it still doesn’t account for the seemingly exponential growth in “lightning” claims submitted by Insureds. The primary reason for the rise in claims is due to the increasing susceptibility of electronic equipment to damages associated with over-voltage exposure. Read more
One of the most elusive issues addressed during the course of adjusting equipment claims concerns preexisting warranties and/or maintenance agreements. Consider the following scenario for discussion purposes – An Insured sustains limited water damage to a production machine that was less than a year old. The machine’s original warranty and supplemental service (maintenance) agreement were active at the time of the incident. The Insured’s maintenance vendor (who also represented the OEM on warranty issues) replaced all components that exhibited any evidence of damage or even exposure. While the machine was returned to normal operational condition and displays no indications to suggest latent damage or operational problems, the OEM and maintenance vendor revokes the warranty and service agreements. In effect, they take the position that the only way that they will reinstate the agreements is if the entire machine is replaced. Although there are effective options available to resolve this type of scenario, the purpose of this discussion is to specifically address the interpretation and application of the actual insurance policy. Do any policies specifically address this issue?
As a Consultant engaged by Adjusters to assess equipment damages I routinely rely on the Adjuster to interpret and apply the insurance policy. Of the actual policies that I have reviewed I have rarely seen specific language that addresses this issue head-on… and only on equipment breakdown insurance policies. Absent of specific language indicating that the loss of a preexisting warranty/service agreement is considered “physical damage” and/or classified as a covered peril, the policies are open to wide variations of interpretation. Most Adjusters seem to apply the intent of the “making the Insured whole” decree and will reasonably attempt to obtain reinstatement of the agreements whenever possible. Since the underlining issue is commonly a gray area, many Adjusters use it as a negotiating tool when pressed by the Insured and/or their representatives. How do you handle demands for reinstatement of equipment warranties if the policy doesn’t specifically address this issue?
Typical loss-related contaminates range from smoke and water/by-products to common (“nuisance”) dust. Original Equipment Manufacturers (OEM) and their authorized service organizations commonly claim that this contamination compromises the long-term reliability and operational integrity of the exposed equipment. Supporting their claim, electronic equipment can potentially be compromised by contamination in the following manners:
1) Corrosive reaction of susceptible and critical metal components (normally associated with combustion by-products such as chloride, sulfate, and nitrate compounds combined in at complex matrix of carbon soot particles and oxidized organic molecules).
2) Galvanic reaction of dissimilar, unprotected, and adjoining metals causing continued degradation) normally associated with water exposure).
agno3 nacl yields agcl nano3cu net ionic equation
lino3 ag agno3 lichemical reaction nacl
how many moles of ions .0200 g of agno3
chemical reaction nacl agno3
net ionic equation between cu agno3
agno3 naoh total ionic equationwhen solutions of nacl and agno3 are mixed what happens
oxidation number nitrogen
balanced equation reaction cu agno3
naoh net ionic equation
3) Moisture absorption forming active electrical leakage paths or “shorting” adjoin circuits (normally associated with common/”nuisance” dust, or heavily carbon-based soot contamination after exposure to a high humidity environment).
4) Abrasive actions degrading critical mechanical and surface contact areas (normally associated with “nuisance” silica dust contamination such as concrete dust).
5) Increased Thermal Load causing overheating (normally associated with gross contamination of common or “nuisance” dust and/or carbon based soot).
Fortunately, many of the contamination incidents that are presented as “actual” damage are only “potential” concerns. Components that don’t exhibit evidence of damages as outlined above are generally candidates for successful restoration. Effective removal of the contamination will remove the potential for the noted reactions and related concerns. “Real” (actual) damage can be appropriately addressed during the decontamination process. What many OEMs or their service providers don’t reveal, or don’t realize, is there are a multitude of acceptable processes available to effectively decontaminate typical loss-affected electronics and sensitive mechanisms.
expected reaction of naohagno3 cucl2 net ionic equation
agno3 msds sigma aldrich
molecular equation nacl agno3
balanced equation for nicl2His fingers slid to her shoulders, holding her fast, and she felt the latent strength of his hands, sensed the power that radiated from him like heat from the sun.
net ionic reaction between cu agno3
nacl complete ionic equationdetermine percentage composition agno3
balance equation nacl agno3na2s2o3 net ionic
bacl2 precipitate color
On the cover of his 1970 runaway bestseller The Greening of America, the manifesto of the counterculture, author Charles Reich parroted Gramsci perfectly: There is a revolution coming. Contrary to Susan's expectations, the patient was neither old nor infirm.
the precipitation reaction between nacl and agno3
balanced molecular equation for agno3 and cuagno3 aq nacl aq net ionic reaction
agno3 plus na2so3complete ionic equation na2co3
how many molecules are in 85g of
agno3 nacl complete ionic equation
aqueous solutions agno3 ki mixed
msds agno3 nitrato plata
nacl and agno3 precipitateThere’s a lesson to be learned here that often goes overlooked. I have another project that involves a small machine fire in the middle of a large manufacturing facility. Although the fire was contained to a single machine, the smoke produced by the incident spread throughout the facility. Initiated by the client’s employees and a local restoration firm, the facility was cleaned in a couple of days and the client resumed a normal production schedule. Several weeks pass and the Adjuster is informed by the client that they’re having problems with several of their automated production lines. They claim that the equipment manufacturing representatives are assigning the problems to the “smoke” – suggesting that smoke is corrosive and have (or will) damage the equipment.
Although I was able to conduct an accurate assessment of the situation by obtaining and analyzing a battery of surface samples throughout the facility, the fact that I’m doing this AFTER there’s a perceived problem magnifies the level of difficulty in getting all parties to agree on the probable conclusions. The “we need new equipment” bug is now securely planted in the client’s ear. Ideally, I would have been there shortly after the loss to obtain the samples necessary to map-out the actual exposure. While it’s obviously important to accurately identify actual damage (including potential issues), it’s equally to important to rule out areas that were NOT affected.
I’ve never encountered a “call-back” reassessment request on losses that I fully mapped-out the residue exposure levels. I have however, had claim assignments linger on to address “damage” to equipment that may have been in harm’s way (but weren’t “scientifically” assessed during initial surveys). My advice – Make sure that “smoke” producing incidents are accurately surveyed and mapped-out to circumvent future concerns. Taking a pro-active position of actual conditions saves the Insurance Company time and money by not having to combat unsubstantiated claims -which commonly arise long AFTER the files are closed.
The most effective process to minimize the problem with “latent” content/equipment damages is to ensure that an accurate assessment is conducted as soon-as-possible following the loss. Ideally, the assessment should take place with the all the equipment in its original position/condition following the loss incident. As much as you want to identify what was exposed and remains suspect, you equally want to determine what equipment was NOT in harm’s way! The objectives of the initial assessment are relatively simple to establish and be performed by initial loss responders (insured’s personnel) with limited guidance:
1) Create a general mapping of the affected areas and equipment positions, supported by ample photographic documentation. Although using an as-built blueprint is ideal, copies of fire evacuation maps or hand-drawn maps are commonly used and effective.
2) Obtain an accurate inventory of ALL equipment that appears to be affected and/or in harm’s way (however remote). Provide additional classifications/tagging of probable exposure and/or damage. A simple, yet highly effective system incorporates the use of colored tags… RED – obvious damage and/or heavy exposure, YELLOW – obvious exposure and/or probable damage and GREEN – no apparent exposure and/or damage).
3) Mitigate further damage to the equipment as it’s assessed (de-energize and initiate initial drying/preservation). Unless absolutely necessary, do NOT move the equipment until a qualified Technician or Engineer can verify actual condition and prescribe final testing/recovery efforts.
The best defense is often the result of a having a great offense… In the absence of reasonable post-loss assessments, ANY and ALL operational problems become associated with the loss incident as soon as something triggers the connection. Many times it’s triggered by an overly cautious Manufacturer or service representative that’s called in to inspect the equipment. More common than not, the inspections result in “damage reports” that either suggests pending catastrophic damage or limit their warranty/service agreements. Once planted, the concept of latent damage becomes forefront and soon becomes the perceived reason for every operational issue encountered after the loss. If you proactively document the loss as recommended, you minimize the issues commonly experienced on content/equipment losses that could otherwise result in re-adjusting closed files.
The property claims industry has changed dramatically in the past decade. Prior to 2000 (when deductibles were just a fraction of what they are today), Property Adjusters were commonly dispatched to the loss-site within hours of an incident. On large and complex losses, a select group of Consultants would accompany the Adjuster and immediately “take control” of the loss. An equipment and machinery specialist would address the production equipment and computer systems, a building restoration specialist would address the building envelope and general contents while a forensic Accountant would work with the Insured and analyze the possible financial impact of the incident. As a seasoned team, the Adjuster’s entourage instinctively knew what the loss needed and responded accordingly. While the Insured provided available resources to assist in the recovery activities, their primary focus was to protect their income and explore the appropriate contingencies. Actual claim payouts were held to a minimum.
As insurance deductibles skyrocketed and Insured’s began to self-insure larger portions of risk in the early 2000’s, serious gaps began to appear in the recovery process. A general slowdown in the economy and a shift in business models to support “lean and mean” operations left many organizations with minimal resources to manage the self-insured portion of the loss. Few organizations now have the necessary resources or knowledge to effectively assess actual loss conditions and respond with the appropriate loss-mitigation efforts. The loss of initial loss control has resulted in many “minor” incidents snowballing to significant insurance claims.
Unfortunately, the window of opportunity to mitigate many equipment claims is an extremely short period of time following the incident. Too often, the Adjuster and the loss consultants are notified too late to initiate optimal loss-mitigation and contain actual damages. Instead of providing pro-active loss control assistance, the Adjuster’s team is relegated to offering limited containment advice or “post mortem” assessments.
Realizing that you can’t turn the clock back, efforts need to be made to better educate the Insured’s first responders and reinforce the awareness of the loss control gap to the loss prevention and underwriting of the insurance companies. The good news is that the disaster planning/business continuity industry has acknowledged the shift and developed plans for (smaller) organizations that would have previously believed that assistance to develop a comprehensive plan was unjustified. On the flip side, the underwriting and loss prevention departments of the major insurance carriers have been slow to help (or force) the Insured’s fill the apparent gap in loss control. Time will tell on how long it takes to turn this super tanker.
His triangular face was framed by ear-length hair, which he was constantly flipping out of his eyes. It was absurd for a man to linger on something that could be bought at a department-store cosmetics counter.
agno3 cuso4 net ionic
will na2co3 and agno3 precipitate
net ionic reaction agno3 hcl2-chlorobutane reacts with agno3 ethanol-water
agno3 hcl agcl hno3 reaction
nacl and agno3 equation
naoh net ionic equation
soluble or insoluble
As a consultant engaged to assess equipment damage (e.g., lightning, fire, etc.) for carriers, I’ve noticed a trend that I’m trying to better understand. In short, I’ve noticed that many Insured’s are drastically understating equipment values, while fewer Adjusters are aggressively pursuing the apparent co-insurance issue. For example, I recently conducted an assessment of a small manufacturing facility that sustained water damage to a single piece of machinery. Although my focus was directed to only the affected machine, it was obvious to me that the total value of all the Insured’s equipment was understated (the values just happened to be listed on one of the forms that the Adjuster provided).
Through discussions with the Insured, it appears that they acquired most of their machinery from plant-closing auctions… and used these (heavy discounted) costs as stated values. In effect, they stated $1,500,000 in values – but in reality, current comparable replacement values were closer to $4,000,000. While I determined that repairs to machine that I assessed were limited (totaling less than $100,000), I mentioned to the Adjuster my belief that the Insured’s total equipment values were understated. Surprisingly, the Adjuster made the statement that the co-insurance penalty was not applicable. The Insured was eventually paid $100,000 (less deductible) for their loss.
Years back, whenever I informed Adjusters of my findings concerning understated values of equipment it seemed like they were all over it and pursued their adjustments accordingly. Are equipment/content claims treated differently or does a specific type of exclusion apply? Or better yet… What’s changed recently that would explain this apparent trend?
single replacement reaction cu
net ionic equation reaction agno3 hcl
Since our last interview I have been unceasingly occupied in endeavouring to discover the names of the eight persons of whom I spoke to you, and, I am sorry to say, I have but partially succeeded. At night, in her big brass bed, no matter how hard she had worked, no matter how many friends she had been with, it always came back to Alan.
complete ionic equation aq nacl aq
formula unit equation nacl agno3
balance bacl2 aq aq
bacl2 agno3 balanced equation
how to balance agno3 cu cu no3 2 ag
net ionic reaction ki
oxidation half reactionnaoh molecular equation
n2h4 agno3 koh
agno3 na2co3 ionic equation
mixing nacl and agno3agno3 na2so3 net ionic equation
nacl balanced net ionic equation
naoh to nano3 agoh
hcl + ionic equation
is the dissolution process of agno3 endothermic or exothermic
2-chlorobutane reaction with agno3
No matter how hard you try to protect your data, your system may still fall victim to data loss. Regardless of the cause of your data loss, there are steps you can take to keep your data loss from becoming a data disaster. The first order of business is to NOT PANIC – You should never assume your lost data is unrecoverable. In most cases, your data is fully recoverable… IF you take the appropriate steps once you realize that there is a problem with your data. Although you can maximize your recovery potential by contacting us immediately to assess your situation and guide you through the recovery process, here’s a few tips that may help you avert a major data disaster.
1. The first recovery attempt is always the best recovery attempt.
2. Do not use file recovery software if you suspect an electrical or mechanical failure. Using file recovery software on a faulty hard drive may destroy what was otherwise recoverable data.
3. Do not clean or operate equipment exposed to water or smoke. There is only one option – Call us immediately. Your chances for a successful recovery are greatly reduced if you make any attempts yourself to clean or dry your damaged computer.
4. If your drive is making unusual clicking, grinding or whirring sounds, shut down your computer immediately. These sounds could be the read/write heads making contact with the platters. Severe or complete data loss could result.
cuso4 agno3 k3po4 bacl2
reaction between agno3 k2cro4
agno3 aq nacl aq net ionic equation
k2cro4 net ionic equation5. Unplug the power to the computer before removing the hard drive and handle the drive carefully. Hard drives are extremely sensitive to static electricity and physical shock.
6. Never remove the cover from the hard drive; this will only cause further damage.
7. “Undelete” tools can save your data from human error. Most disk utility packages contain a function that allows you to retrieve an erased file. This tool must be used immediately; however, because your computer will quickly write new data over the deleted file. For more information see your Windows documentation or help file.
If you have suffered data loss, seek professional help. Professional data recovery services offer the expertise and tools required to recover your data quickly and efficiently. As a Kroll Ontrack Data Recovery Certified Partner, you can count on Technical Recovery Process when disaster strikes and compromises your data!
Guidelines for Handling Water-damaged Electrical Equipment
NOTICE AND DISCLAIMER – Please see the last page of this document.
Use of this Publication:
This publication provides guidelines on how to handle electrical equipment that has been exposed to water through flooding, fire fighting activities, hurricanes, etc. It is designed for use by suppliers, installers, inspectors, and users of electrical products. Electrical equipment exposed to water can be extremely dangerous if reenergized without proper reconditioning or replacement. Reductions in integrity of electrical insulation due to moisture, debris lodged in the equipment components, and other factors, can damage electrical equipment by affecting the ability of the equipment to perform its intended function. Damage to electrical equipment can also result from flood waters contaminated with chemicals, sewage, oil, and other debris that will affect the integrity and performance of the equipment. Ocean water and salt spray can be particularly damaging due to the corrosive and conductive nature of the salt water residue.
many milliliters 0.200 m agno3 solution required precipitate
balanced molecular equation agno3 na2co3
nacl agno3 reaction
net ionic reaction 6m hcl agno3
agno3 polar water molecules
agno3 cacl2 net ionic
naoh agno3 net ionic equation
agno3 cucl2 agcl cu no3 2balanced net ionic equation for agno3 naoh
aq hcl aq agcl s hno3 aqtotal ionic equation nacl plus agno3
You've been laughing everything off ever since we were married. He was tired of the plumbing problems, he said, and the weird messages on the answering machine, and Roscommon had come in while he was at work and torn down the Mel King campaign poster on our front balcony.
oxidation number nwrite balanced complete ionic equation for agno3 nacl
balanced chemical equation k2cro4
kcl agcl hno3 balancedShe had no sword to protect her; that was what he had said he would do. It was one of the many occasions when it would have been a pleasure to push him off of the Empire State Building, if there had been any way of enticing him there.
ionic equation hcl agno3 agcl hno3na2s2o3 net ionic
balanced molecular equation bacl2 agno3
cu redox reaction
is agno3 hcl agcl hno3 a redox reactioncomplete and net ionic equation agno3 nacl
complete and net ionic equation agno3 nacl
zncl2 balanced equation
balanced equation for 2-chloropropane with agno3 ethanolAlthough we routinely offer technical advice to clients regarding the recovery of technology assets following a fire, the City of Hibbing, MN provides very informative recommendations on their website for almost everything else that people need to know following a devastating fire. Here’s the information that they’ve made available…